Anton Tools Home
Email Anton Tools
Request A Catalog
Search Our Site

Magnetic Transfer
Products Usage
Auxiliary Plates
Parallels
V-Blocks
Parallel / V-Block Sets
Blocks
Adjustable V-Blocks

2 Way Steel Parallels
Steel Parallels
Parallel Sets
4 Way Steel Parallels
Steel Parallels
Parallel Sets
Six Way Set-Up Blocks
Precision Steel Vise
Steel
V-Blocks
Angle Blocks
Angle Block Sets
Specials
Price List
Without Holes
With Holes Drilled C' bored and tapped
For Use on Jig Borers and Jig Grinders and many other machines
No tool room and inspection room should be without one!
Anton's Precision 6-Way Set-up Blocks save time and money in the machine shop, toolroom, and inspection department.
Made of highest quality steel. Precision ground to unusually close tolerances on all six sides. Scientifically hardened to assure permanent accuracy, straightness and squareness. Unsurpassed for accurate positioning on jig borers, jig grinders, drill presses, milling machines, etc.
Specifications
•
 High quality alloy steel.
•
 Hardened to Rock 56-60.
•
 Ground on all 6 sides to tolerances shown in the chart below.

 
Part #
DIMENSIONS
Squareness
Parallelism
Tolerances
Approx.
Weight
Width
 Height Length
All Surfaces
All Surfaces
SBH-123
1
2
3
within .0002"
within .0001"
+.0002"
1-1/4 lbs.
SB-123
1
2
3
within .0002"
within .0001"
+.0002"
1-3/4 lbs.
Side A
Holes through the block #1-2-3-4 are 1/4 NC, threaded on both sides.
Holes through the block #5-6 are 3/8 NC, threaded right through block.
Holes through the block #7-8 are for passing 3/8 screws, counterbored on one side only.
Side B
Holes through the block #9-10 are passing 3/8 screws, counterbored on one side only.
Holes through in cross holes #11 are 1/4 NC, one as shown and one on the opposite side.
Side C
Holes through the block #12-13 are for passing 3/8 screw, counterbored on both sides.
Holes through in cross holes #14-15 are 1/4 NC, two as shown and two on the opposite side.
Total number of holes for the 6 sides is 30.

 
Thank you for choosing Anton Tools Corporation! And remember...
Think Precision... Think Quality... Think Anton!
P.O. Box 320 · Greentown, PA 18426
570-676-5801 · Fax 570-676-5803 · E-Mail anton@antontools.com